J. F. Shea Construction, Inc.

Is seeking qualified DBEs

J. F. Shea Construction, Inc. is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for all items of work, including but not limited to:
1 LEAD COMPLIANCE PLAN
2 PROGRESS SCHEDULE (CRITICAL PATH METHOD)
3 TIME-RELATED OVERHEAD (LS)
4 DEVELOP WATER SUPPLY
5 CONSTRUCTION AREA SIGNS
6 TRAFFIC CONTROL SYSTEM
7 TEMPORARY TRAFFIC STRIPE (TAPE)
8 TEMPORARY PAVEMENT MARKING (TAPE)
9 TEMPORARY TRAFFIC STRIPE (PAINT)
10 TRAFFIC PLASTIC DRUM
11 PORTABLE CHANGEABLE MESSAGE SIGN (LS)
12 PORTABLE RADAR TRAILER
13 TEMPORARY RAILING (TYPE K)
14 TEMPORARY CRASH CUSHION MODULE
15 JOB SITE MANAGEMENT
16 PREPARE STORM WATER POLLUTION PREVENTION PLAN
17 RAIN EVENT ACTION PLAN
18 STORM WATER SAMPLING AND ANALYSIS DAY
19 STORM WATER ANNUAL REPORT
20 MOVE-IN/MOVE-OUT (TEMPORARY EROSION CONTROL)
21 TEMPORARY HYDRAULIC MULCH (BONDED FIBER MATRIX)
22 TEMPORARY COVER
23 TEMPORARY CHECK DAM
24 TEMPORARY DRAINAGE INLET PROTECTION
25 TEMPORARY FIBER ROLL
26 TEMPORARY CONSTRUCTION ENTRANCE
27 STREET SWEEPING
28 TEMPORARY CONCRETE WASHOUT
29 ASBESTOS COMPLIANCE PLAN
30 WORK AREA MONITORING (BRIDGE)
31 TREATED WOOD WASTE
32 REMOVE CONCRETE (CY)
33 CLEARING AND GRUBBING (LS)
34 ROADWAY EXCAVATION
35 SHOULDER BACKING
36(F) STRUCTURE EXCAVATION (BRIDGE)
37(F) STRUCTURE BACKFILL (BRIDGE)
38 IMPORTED BORROW (CY)
39 BONDED FIBER MATRIX (SQFT)
40 FINISHING ROADWAY
41 CLASS 2 AGGREGATE BASE (CY)
42 REPLACE ASPHALT CONCRETE SURFACING
43 HOT MIX ASPHALT (TYPE A)
44 DATA CORE
45 TACK COAT
46 FURNISH STEEL PILING (HP 14 X 117)
47 DRIVE STEEL PILE (HP 14 X 117)
48(F) STRUCTURAL CONCRETE, BRIDGE FOOTING
49(F) STRUCTURAL CONCRETE, BRIDGE
50(F) STRUCTURAL CONCRETE, BRIDGE (POLYMER FIBER)
51(F) STRUCTURAL CONCRETE, APPROACH SLAB (TYPE N)
52(F) MINOR CONCRETE (MINOR STRUCTURE)
53 FURNISH PRECAST PRESTRESSED CONCRETE WIDE FLANGE GIRDER (50'-60')
54 FURNISH PRECAST PRESTRESSED CONCRETE WIDE FLANGE GIRDER (100'-110')
55 ERECT PRECAST PRESTRESSED CONCRETE GIRDER
56 JOINT SEAL (MR 1 1/2")
57(F) BAR REINFORCING STEEL (BRIDGE)
58(F) BAR REINFORCING STEEL (EPOXY COATED) (BRIDGE)
59 PUBLIC SAFETY PLAN
60 PREPARE CONCRETE BRIDGE DECK SURFACE
61 FURNISH POLYESTER CONCRETE OVERLAY
62(F) PLACE POLYESTER CONCRETE OVERLAY
63 BRIDGE REMOVAL
64 24" CORRUGATED STEEL PIPE (.109" THICK)
65 REMOVE EDGE DRAIN
66 36" PRECAST CONCRETE PIPE INLET
67 REMOVE CULVERT (LF)
68 REMOVE INLET
69 ROCK SLOPE PROTECTION (60 LB, CLASS II, METHOD B) (CY)
70 ROCK SLOPE PROTECTION (20 LB, CLASS I, METHOD B) (CY)
71 ROCK SLOPE PROTECTION FABRIC (CLASS 8)
72 MINOR CONCRETE (TEXTURED PAVING)
73(F) MISCELLANEOUS IRON AND STEEL
74(F) BRIDGE DECK DRAINAGE SYSTEM
75 FENCE (TYPE BW, 5-STRAND, METAL POST)
76 REMOVE FENCE (TYPE BW)
77 REMOVE PAVEMENT MARKER
78 DELINEATOR (CLASS 1)
79 DELINEATOR (CLASS 2)
80 PAVEMENT MARKER (RETROREFLECTIVE-RECESSED)
81 MILEPOST MARKER
82 MARKER (CULVERT)
83 OBJECT MARKER (TYPE L-1)
84 REMOVE ROADSIDE SIGN (WOOD POST)
85 REMOVE ROADSIDE SIGN (STRAP AND SADDLE BRACKET METHOD)
86 FURNISH SINGLE SHEET ALUMINUM SIGN (0.063"-UNFRAMED)
87 FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-FRAMED)
88 ROADSIDE SIGN - ONE POST
89 ROADSIDE SIGN - TWO POST
90 INSTALL SIGN (STRAP AND SADDLE BRACKET METHOD)
91 INSTALL ROADSIDE SIGN (LAMINATED WOOD BOX POST)
92 FURNISH LAMINATED WOOD BOX POST
93 FURNISH LAMINATED PANEL SIGN (2 1/2"-TYPE B) FOR RETROREFLECTIVE SHEETING (TYPE XI)
94 FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-UNFRAMED) FOR RETROREFLECTIVE SHEETING (TYPE XI)
95 RETROREFLECTIVE SHEETING (TYPE XI)
96 MIDWEST GUARDRAIL SYSTEM
97 VEGETATION CONTROL (MINOR CONCRETE)
98(F) CHAIN LINK RAILING (TYPE 7 MODIFIED)
99 DOUBLE MIDWEST GUARDRAIL SYSTEM
100 TRANSITION RAILING (TYPE WB-31)
101 RAIL TENSIONING ASSEMBLY
102 ALTERNATIVE IN-LINE TERMINAL SYSTEM
103 ALTERNATIVE MEDIAN TERMINAL SYSTEM
104(F) CONCRETE BARRIER (TYPE 742)
105 REMOVE GUARDRAIL
106 TWO-COMPONENT TRAFFIC STRIPE (RECESSED)
107 TWO-COMPONENT PAINT PAVEMENT MARKING
108 REMOVE THERMOPLASTIC TRAFFIC STRIPE
109 12" RUMBLE STRIP (ASPHALT CONCRETE PAVEMENT)
110 MAINTAINING EXISTING TRAFFIC MANAGEMENT SYSTEM ELEMENTS DURING CONSTRUCTION
111 MODIFYING EXISTING ELECTRICAL SYSTEM
112 MOBILIZATION

J. F. Shea Construction Inc. is a union signatory contractor. Subcontractors must possess a current contractor's license, insurance coverage and worker's compensation for the entire length of the contract. All subcontractors will be required to sign our standard Subcontract Agreement. 100% payment and performance bonds may be required. Please call if you need assistance in obtaining insurance, bonding, equipment, materials and/or supplies. Plans and specifications can be viewed at our office located at 17400 Clear Creek Road, Redding, Ca. 96001 or call for any additional needed project information. J. F. Shea Construction Inc. intends to work cooperatively with all qualified firms seeking work on this project. We are an equal opportunity employer and will work with any interested subcontractor to identify opportunities to break items into economically feasible packages. Women and Minority Employees are encouraged to apply.


J. F. SHEA CONSTRUCTION, INC.
P.O. Box 494519 - Redding, CA 96049
Phone: (530) 246-4292 Fax: (530) 246-9940
An Equal Opportunity Employer