DBEGoodFaith.com


Rocky Mountain Construction

Is seeking qualified DBE



Outreach Coordinator
Ron Criss

Telephone
(541) 882-8377

Fax
(541) 884-3567

Address
4815 Tingley Lane Ste. A
Klamath Falls, OR 97603


Project Name
In Modoc County about 35 miles south of Newell from 1.3 miles south of Loveness Road to 0.2 mile north of Boles Road

Bid/Contract #
02-2H3804

Awarding Agency
Caltrans

Project Location
Canby, CA, Modoc County, CA

Bid Date
01/10/2017 at 02:00

Project Details
Rocky Mountain Construction is requesting quotes from Certified and licensed DBE, SBE, and DVBE subcontractors and suppliers for the following items, however, quotes will be accepted for all bid items. LEAD COMPLIANCE PLAN, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, TEMPORARY PAVEMENT MARKING (TAPE), PORTABLE CHANGEABLE MESSAGE SIGN (LS), JOB SITE MANAGEMENT, PREPARE WATER POLLUTION CONTROL PROGRAM, TREATED WOOD WASTE, REMOVE GUARDRAIL, REMOVE THERMOPLASTIC PAVEMENT MARKING, ADJUST GUARDRAIL, COLD PLANE ASPHALT CONCRETE PAVEMENT, SHOULDER BACKING, ASPHALTIC EMULSION (FOG SEAL COAT), PREPAVING INERTIAL PROFILER, PREPAVING GRINDING DAY, REPLACE ASPHALT CONCRETE SURFACING, HOT MIX ASPHALT (TYPE A), DATA CORE, TACK COAT, OBJECT MARKER (TYPE L-1), ALTERNATIVE FLARED TERMINAL SYSTEM, INTERMEDIATE ANCHOR, THERMOPLASTIC PAVEMENT MARKING, THERMOPLASTIC TRAFFIC STRIPE (SPRAYABLE), PAVEMENT MARKER (RETROREFLECTIVE-RECESSED), and QUALITY CONTROL. RMC will be open to breaking out contract work items into economically feasible units to allow for increased DVBE/DBE participation. Plans and specifications can be viewed on the Caltrans website at http://www.dot.ca.gov/des/oe/weekly-ads/all-adv-projects.php

Subcontractors must possess a current contractor's license and comply with all California registration requirements. Subcontractors must have worker's compensation and insurance coverage at limits acceptable to RMC during the entire length of the prime contract and include Waiver of Subrogation to RMC on insurance policies. If we can be of assistance with providing specs, plans, obtaining bonding, insurance, materials and/or supplies or have any questions related to the referenced project, please contact our office at (541)882-8377. RMC may require subcontractors to provide 100% performance and payment bonding for their value of work. If required by RMC, we will reimburse bonding costs up to 1.5% of the total subcontract value. RMC is an Equal Opportunity Employer and will consider all bids that may be submitted.

How to get in touch


Outreach Coordinator
Ron Criss

Telephone
(541) 882-8377

Fax
(541) 884-3567

Address
4815 Tingley Lane Ste. A
Klamath Falls, OR 97603